K12100 Oxidation Stability of Mineral Insulating Oils

Test Method
Determines oxidation stability of mineral transformer oils by measuring the amount of sludge and acid formed under prescribed accelerated aging conditions.

Features and Benefits
• Conforms to ASTM D2440 specifications

• Microprocessor temperature control with digital display and overtemperature cut-off

• Six-sample testing capacity


Click on the image to view a larger photo of the instrument.

K12100 Oxidation Stability of Mineral Insulating Oils
Constant temperature oil bath for testing oxidation stability of mineral insulating oils. Immerses six oil receptacles at the required depth per ASTM specifications at 110°C ± 0.5°C, and controls oxygen flow to each sample at the rate of 1L/h ± 0.1L/h through six independent flowmeters mounted on a common manifold. Insulated double-wall stainless steel bath has microprocessor temperature control with °C/°F switchable digital setpoint and display. Operator and equipment are protected by an overtemperature control circuit which automatically interrupts power to the unit when bath temperature exceeds a programmed cut-off point. Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. Contact your Koehler representative for information. Order bath thermometer drying tower and catalyst separately.

Specifications
Conforms to the specifications of: ASTM D2440

Capacity: Six samples

Temperature Range: ambient to 260°F (127°C)

Circulator: 1/20hp impeller

Bath Capacity/Medium: 2.5 gal (9.5L) white technical oil

Electrical Requirements
115V 50/60Hz, Single Phase, 8.1A
220-240V 50/60Hz, Single Phase, 4.2A

Included Accessories
Oil Receptacle and Head (6)

Dimensions lxwxh,in.(cm)
14x15x22 (36x38x56)
Net Weight: 31 lbs (14.1kg)

Shipping Information
Shipping Weight: 61 lbs (27.7kg)
Dimensions: 14.4 Cu. ft.

Ordering Information
Catalog
Number
Product Description
Electrical Requirements
K12100
Oxidation Stability Apparatus
115V 50/60Hz
K12190
Oxidation Stability Apparatus
220-240V 50/60Hz

Accessories
Catalog
Number
Product Description
K12130
Copper Catalyst Coils
Sealed in a glass jar with a nitrogen atmoshpere. Pack of 24 (12 sets).
332-005-010
Drying Tower, 250mL
With ground glass stopper and side tubes.
332-005-011
Glass Filter Crucible
250-000-95C
ASTM 95C Thermometer
Range: 100 to 130
°C
355-001-001
White Technical Oil.
1 gal container.
355-001-003
White Technical Oil.
5 gal container.
When inquiring about NIST traceable certified thermometers, please refer to the catalog number for the corresponding thermometer and replace the middle three zeros in the catalog number with 004. Example: 251-000-01C ASTM 1C Thermometer would be 251-004-01C ASTM 1C Certified Thermometer.

www.koehlerinstrument.com