The Koehler Halogen Analyzer consists of a manual or automatic sample feed, a two-stage furnace, unit and a microcoulometric titration device. A combination of a quick-heating and programmable IR furnace and a constant-temperature reduction furnace ensure the complete, residue-free combustion of the samples in the oxygen flow. The combustion gases then enter the coulometric detection unit for analysis. Control of the overall system and measurement data evaluation is by means of user-friendly software.
- The unique furnace unit of the Koehler Halogen Analyzer consists of a programmable IR furnace with extremely fast heating and cooling rates and coolant-free cooling by means of heat pipes as well as a downstream reduction furnace with a constant temperature.
- The sliding cover of the furnace chamber makes this easily observable and accessible: the condition of the combustion tube can be assessed at any time without dismantling.
- The heated gas outlet line prevents water condensation. This prevents halogen entrainment and guarantees exact series of measurements. A safety valve protects the furnace against sulphuric acid. Easy dismantling and cleaning.
- A closed detection unit offers the discerning user the possibility of tempering and greater safety at work.
- Results can be transmitted to LIMS systems.
- Quickly ready for use and low maintenance costs.
Coulometric Titration Units
All of the Couloumetric Titration Units from Koehler offer:
Microcoulometric determination with a 3 electrode system.
• Heated gas outlet line.
• Potentiometric end point determination impedance converter mounted directly on the combination electrode, no interference during transmission of the measurement signal.
Both a closed and open titration stand configuration are available. The closed titration stand allows safe placement of the electrolysis cell, extraction and scouring of the waste gas, and tempered titration cell. The open stand allows the titration cell and gas line to be seen by the user at all times and provides a direct view of the detection unit.
Automatic Sample Changer
• Turntable for up to 52 containers with membrane filters.
• Automatic transfer of the samples into the combustion boat
AOX: up to 200mL aqueous sample
EOX: 10μL - 500μL injection volume
TX: solids max. 1g depending on material
Measurement Range: 0.1 – 300 μg Cl abs.
Precision: < 1% relative
Measurement Time: 5 – 10min depending on halogen content
Titration Current: 2 – 450 μA
- Oxygen 99.95%
- Argon 99.95% for EOX
- Consumption each approx. 10 – 12 L/hr
Maximum Temperature: 1000°C
- Up to 5 independently programmable temperature gradient and duration intervals
Temperature Range: 20 to 1000°C
230V 50Hz 20A