• SV3000 Saybolt Viscosity Bath

SV3000 Saybolt Viscosity Bath



Determines the time required for 60mL of sample to flow through a calibrated orifice under precisely controlled conditions. Saybolt Universal Seconds (SUS) is the standard measurement for lubricants, insulating oils and lighter fuel grades, and Saybolt Furol Seconds (SFS) is used for heavier oils and bitumens.

  • Microprocessor control of temperature between ambient and 240 °C (464°F)
  • Four tube capacity
  • Dual digital displays show setpoint and actual temperature
  • Selectable temperature scale - Celsius or Fahrenheit
  • Conforms to ASTM D88, D244, E102, and related specifications

Constant temperature bath for viscosity determinations using Saybolt viscometer tubes and orifices. Microprocessor PID circuitry assures precise temperature control within ASTM specified tolerances throughout the operating range of the bath. Simple push-button controls and dual digital displays permit easy setting and monitoring of bath temperature. Two-place calibration offset is provided. Accommodates four viscometers and four 60mL receiving flasks. Sliding draft shields and a chemical-resistant alignment plate facilitate handling of the flasks, and glare-free fluorescent backlighting is provided for easy viewing of the samples. Insulated bath interior is constructed entirely of heavy gauge stainless steel. A built-in overflow pipe and drain valve simplifies filling of the bath fluid to the proper level. Chemical resistant top plate provides excellent insulation and is easily removed to allow for cleaning of the bath interior. A cooling coil for tap water or refrigerated coolant is provided for operation at near-ambient temperatures. Steel cabinet has leveling feet and a chemical resistant polyurethane-epoxy finish.

  • Cleaning Plunger
  • Oil Strainer
  • Tube Nut Wrench
  • Port Closures
  • Chained Corks
  • Withdrawal Tube
  • Orifice Wrench
  • Port Covers
  • Thermometer Supports

Conforms to the specifications of: ASTM D88, D244, E102, AASHTO T72; FTM 791-304

Capacity: 4 viscometer tubes

Temperature Range: ambient to 464 °F (240 °C) 

Temperature Stability: ± 0.05 °F (± 0.03 °C)

Bath Capacity: 5 gal (19 L)

Recommended Bath Medium: water or suitable heat transfer fluid

115V 60Hz, Single Phase, 12.3A
220-240V 50/60Hz, Single Phase, 6.4A

lxwxh,in.(cm): 29 x 25 x 33 (74x63.5x84)

Net Weight: 65 lbs (29.5 kg)

Shipping Weight: 94 lbs  (42.7 kg)  

Dimensions: 28x24x33 in. (72x61x84 cm) 

  • K22009 Saybolt Viscometer Tube, Brass
  • K22309 Saybolt Viscometer Tube, Stainless Steel
  • K22010 Saybolt Universal Orifice
  • K22010-C/F Saybolt Universal Orifice with Calibration Certificate
  • K22020 Furol Orifice
  • K22020-C/F Sayblt Furol Orifice with Calibration Certificate
  • K22029 Kansas Road Oil Orifice
  • 332-003-003 Borosilicate Glass Receiving Flask, 60 mL, for SV3000
  • K22030 Orifice Wrench for Universal and Furol Orifices
  • K22039 Orifice Wrench for Kansas Road Oil Orifice
  • K22050 Socket Wrench
  • K22060 Oil Strainer
  • K22070 Cleaning Plunger
  • K22080 Displacement Ring
  • K22090 Withdrawal Tube
  • K22011 Thermometer Support
  • 355-001-001 White Technical Oil, 1 Gallon Container
  • 355-001-002 Silicone Heat Transfer Fluid, 1 Gallon Container
  • 355-001-003 White Technical Oil, 5 Gallon Container
  • 355-001-004 Silicone Heat Transfer Fluid, 5 Gallon Container
  • 250-000-17F ASTM 17F Thermometer
  • 250-000-17C ASTM 17C Thermometer