K33850 Existent Gum Steam Generator

Test Method
Gum formed during fuel storage can deposit on induction system surfaces, intake valves, stems and guides. To test for gum content, a 50mL sample is evaporated in an aluminum block bath for a specified period under controlled conditions of temperature and flow of air (aviation and motor gasolines) or steam (aircraft turbine fuel).

Features and Benefits
• For steam-jet method testing of aircraft turbine fuels

• Meets output requirements of three-unit and six-unit evaporation baths

• Electrically heated for clean, efficient operation and ease of installation

• Meets applicable ASME, NEC standards; UL listed, CSA approved

Click on the image to view a larger photo of the instrument.

K33850 Existent Gum Steam Generator
Electrically heated boiler provides instantaneous and reserve steam capacity for steam-jet evaporation tests. Easy to install and operate; electrical heating eliminates the need for on-site fuel combustion. Requires only a water feed source and electrical hook-up. Ruggedly constructed, with long life industrial grade incoloy heating element. Includes a full range of safety features: automatic water level control and low water cut-off; steam safety valve; high-limit pressure cut-out with manual reset; steam pressure gauge.

Output: 54.1 lbs steam/hr. 212°F

Bhp Rating: 1.83

kW Rating: 18

Dimensions lxwxh,in.(cm)
20x28x36 (51x71x91)
Net Weight: 185 lbs (83kg)

Shipping Information
Shipping Weight: 200 lbs (91kg)
Dimensions: 18 Cu. ft.

Ordering Information
Product Description Electrical Requirements
K33850/208601 Steam Boiler 208V 60Hz, Single Phase, 87A
K33850/208603 Steam Boiler 208V 60Hz, Three Phase, 50A
K33850/240601 Steam Boiler 240V 60Hz, Single Phase, 75A
K33850/240603 Steam Boiler 240V 60Hz, Three Phase, 43A
K33850/380603 Steam Boiler 380V 50/60Hz, Three Phase, 27A
K33850/415503 Steam Boiler 415V 50Hz, Three Phase, 25A
K33850/480503 Steam Boiler 480V 60Hz, Three Phase, 22A

Product Description
K33810 Steam Superheater
Provides dry superheated steam for evaporation baths not equipped with a built-in superheater. Use together with an outside steam source for steam-jet method testing of aircraft turbine fuels. Superheating chamber and condensate trap are constructed entirely of stainless steel. Solid state temperature controller adjusts between 0-550°F. Equipped with steam inlet and outlet connections and condensate drain valve. Steel exterior has a chemical resistant polyurethane enamel finish.
Dimensions 5x27x91/2" (13x70x24cm).
Shipping Weight: 23 lbs (10.4kg)
220-240V 50/60Hz, Single Phase, 6.8A
K33710 Sample Beaker, 100mL spun copper, 50x78mm
332-002-017 Sample Beaker, Pyrex™, 100mL
250-000-03F ASTM 3F Thermometer
Range: 20 to 760°F
250-000-03C ASTM 3C Thermometer
Range: –5 to +400°C
When inquiring about NIST traceable certified thermometers, please refer to the catalog number for the corresponding thermometer and replace the middle three zeros in the catalog number with 004. Example: 251-000-01C ASTM 1C Thermometer would be 251-004-01C ASTM 1C Certified Thermometer.