• Lead Corrosion Apparatus

Lead Corrosion Apparatus

Measures the corrosiveness of lubricating oils to lead in the presence of a copper catalyst. Lead and copper test panels are rotated in the test lubricant under specified test conditions and the degree of corrosion is determined by the change in weight of the lead panel.

  • Conforms to FTM 791-5321 specifications
  • Six-sample capacity
  • Microprocessor programmable high accuracy temperature control

Constant temperature apparatus rotates copper and lead test panels in lubricant samples to determine corrosiveness to lead per FTM specifications. Panels are rotated at 600rpm in samples maintained at 163°C (325°F) and aerated at 0.94L/min. (2.0 Cu. ft./hr.). Test panel shafts ride on ball bearing spindles driven by a 1⁄15hp motor. A counterbalanced support bar positions the drive shaft for testing or for mounting and removal of test panels. When the support bar is raised, a safety microswitch automatically stops the drive motor to prevent splashing of hot oil. Fully insulated bath features double-wall stainless steel construction with a built-in support rack to suspend test cells vertically at the proper depth. Microprocessor PID control provides quick temperature stabilization without overshoot, and the bath is protected by an over-temperature control circuit that interrupts power should bath temperature exceed a programmed cut-off point. Dual LED displays provide actual and setpoint temperature values in °C/°F format. Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. Contact your Koehler representative for information. A 1⁄20hp stirrer thoroughly circulates the bath medium for temperature uniformity. Redundant over-temperature protection is provided by a built-in backup thermostat. Flowmeters and valves mounted on a convenient manifold provide individual air flow control for each test cell.

  • Copper Test Panels (6)
  • Lead Test Panels (6)
  • Mounting Hardware for Panels

Conforms to the specifications of: 

FTM 791-5321

Testing Capacity: 6 lubricant samples

Maximum Temperature: 199°C (390°F)

Temperature Control Stability: ±0.05°C (±0.1°F)

Air Flow Control: 0.94±0.047L/min. (2±0.1 Cu. ft./hr) six (6) flowmeters mounted on a common manifold

220-240V 60Hz, Single Phase, 14.5A
220-240V 50Hz, Single Phase, 14.5A

lxwxh,in.(cm): 39x25x47 (99x64x119)
Net Weight:  290 lbs (131.5 kg)

Shipping Weight: 438 lbs (198.7 kg)

Dimensions: 45x32x61 in. (114.3x81.3x155.0 cm)

  • K29910 Borosilicate Glass Sample Tube 
  • 250-000-16F ASTM 16F Thermometer - Range: 85 to 392°F 
  • 250-000-16C ASTM 16C Thermometer - Range: 30 to 200°C
  • K29920 Lead Test Panels
  • K29930 Copper Test Panels