Loss on Heat / Rolling Thin Film Oven
Determines the effect of heat and air on a moving film of asphalt to serve as an indicator of approximate change in properties during conventional hot-mixing. The results are reported in terms of the changes in selected properties such as viscosity, penetration and ductility brought about by the RTFO test, as evidenced by test data taken before and after the 75 minute oven cycle.
- Conforms to the specifications of: ASTM D2872; AASHTO T240
Double-walled electrically heated convection oven for rolling thin film oven tests on asphalts. Incorporates all required features per ASTM specifications, including: door with double-pane viewing window; symmetrical top and bottom vents; air plenum; squirrel cage-type 1725rpm fan; digital indicating thermostat to control oven temperature at 163°C ±0.5°C; vertical circular carriage to mechanically rotate the samples at 15 ±0.2rpm; air jets to blow heated air into each sample bottle at its lowest point of travel; and a calibrated flowmeter to control air flow at 4000mL/min. An overtemperature cut-off circuit disconnects power to the unit in the event of control failure.
Conforms to the Specifications of: ASTM D2872; AASHTO T240
wxdxh,in.(cm): 28x26x31.5 (71x66.5x79.5)
Net Weight: 190 lbs (86.2 kg)
Shipping Weight: 367 lbs (166.5 kg)
Dimensions: 35x41x51 in. (88.9x104.1x129.5 cm)
- K88000-1 Glass Sample Container
- 250-000-13C ASTM 13C Thermometer
- K88000-2 Cooling Rack