• Conforms to ASTM D1319 specifications
• Quick connections for columns provide faster set-up and analysis
• Integrated vibration system for dry silica gel packing
• Handheld UV Lamp
• Two, four, or six column models available
• Available in Standard Wall and Precision Bore

A complete system for conducting FIA analyses of a single or up to six samples simultaneously. Each system is complete with an upper multi-position air pressure manifold with independently-operated gauges, pressure regulators and ball O-ring joints allowing for individual pressure control at each column. Each pressure regulator may be set at any point from 0-15 psi and will maintain the set pressure regardless of changes in back pressure. An integral pressure gauge on each station continuously registers the active pressure on each column. The ball O-ring connection system connects the pressure regulators to the upper columns, and the proper seal is achieved by applying moderate clamping pressure of stainless steel clamps without utilizing any grease. Convenient O-ring compression type fittings simplify the connection of the analyzer tubes (3mm OD x 1200mm) to the upper columns. The internal geometry of the fittings is optimized for transition between tubing diameters and a simple twist of the connection fitting releases the analyzer tube. O-ring compression type fittings are also used to cap the end of each analyzer tube with the column support tips. The tips contain an internal porous polyethylene disc in order to support the silica gel packing in each analyzer tube. An integrated electric vibration system is mounted to the upper chassis so that the columns can be vibrated to facilitate the dry gel packing procedure, and features an on/off and amplitude selector switch. The complete unit also includes a 1mL syringe with 4” needle, two gel bottles for pouring silica gel, extra O-rings, stainless steel ball-and-socket joint clamps, and two mounting brackets with screws for stabilizing chassis.

Standard Model

• Standard Wall
• Standard FIA Column, Flat End (2 to 6)
• Analyzer Tubes (40) 
• Delrin Connectors 
• Support Tip Fittings 
• Syringe, 1ml (1) 
• Needle, 4" (1) 
• Gel Bottle (2) 
• O-Rings: (10)-8mm, (10)-3mm 
• Stainless Steel Ball and Socket Joint Clamps 
• Mounting Brackets with screws (2) 
• Handheld UV Lamp

Precision Bore Model

• Integrated Electric Vibrator Motor Precision Bore
• Precision Bore FIA Column (2 to 6)
• 12/2 Pinch Clamp (2 to 6)
• 12/2 Precision Bore Tip (2 to 6)
• Syringe, 1ml (1) 
• Needle, 4" (1) 
• Gel Bottle (2) 
• Manifold Connection Tubing 
• Stainless Steel Ball and Socket Joint Clamps 
• Mounting Brackets with screws (2)
• Handheld UV Lamp 

Conforms to the specifications of: ASTM D1319; IP 156; ISO 3837; NF M 07-024

115V 60Hz
220-240V 50/60Hz

lxwxh,in. (cm): 8x26x82 (20x66x208)
Net Weight: 
Two-Position: 61 lbs (27.7 kg) 
Four-Position/Six-Position: 129 lbs (58.5 kg)

Shipping Weight

Two-Position: 160 lbs (72.6 kg)
Four-Position/Six-Position: 258 lbs (117.0 kg)

Dimensions

Two-Position:85x16x16 in. (215.9x40.6x40.6 cm)
Four-Position/Six-Position: 85x34x16 in. (215.9x86.4x40.6 cm)

• K41500-4 Silica Gel, 500 Gram Amber Bottle
• K41500-5 Silica Gel, Dyed, 40 Gram Bottle
• K41579 Standup UV Lamp, 115V 60Hz
• K41580 Standup UV Lamp, 230V 50/60Hz

Below are links to tutorial videos for this product

Please login to access resources »