Antirust Properties of Petroleum Products Pipeline Cargoes
Used to control corrosion in product pipelines caused by moisture condensed from gasoline and distillate fuels. Antirust properties are determined by immersing a polished steel test specimen in a stirred mixture of the sample and distilled water held at constant temperature.
- Conforms to NACE TM-01-72, ASTM D665* and D3603* specifications
- Accommodates six sample beakers
- Microprocessor temperature control with digital display and over-temperature protection
Six-place constant temperature bath with stirrers for rust preventing characteristics tests. Stirs sample-water mixtures at 1000rpm and controls temperature with ±0.5°C (±1°F) stability. Immerses test beakers at the proper depth per NACE specifications. The microprocessor temperature control has °C/°F switchable digital setpoint and display. The operator and equipment are protected by an over-temperature control circuit which automatically interrupts power to the unit should the bath temperature exceed a programmed cut-off point. Stainless steel stirrer paddles are driven at 1000rpm by an improved pulley drive-roller bearing arrangement. Paddles move to a raised position for placement of sample beakers in the bath. The stainless steel bath includes a perforated support shelf for beakers and cover plate. A long lasting polyester drive belt improves reliability. Drive train components are protected by a removable steel guard. All exterior surfaces have stainless steel or chemical resistant polyurethane enamel finishes.
- Steel Test Specimens (6)
- Type 2 Plastic Specimen Holders (6)
- Plastic Beaker Covers (6)
Conforms to the specifications of:
NACE TM-01-72; ASTM D665*, D6158, D3603*; IP 135; ISO 7120; DIN 51585; FTM 791-4011; NF T 60-151
Testing Capacity: Six (6) 400mL sample beakers
Maximum Temperature: 104°C (220°F)
Temperature Control Stability: ±0.5°C (±1°F)
Heater Range: 0-1500W
Drive Motor: explosion proof ball bearing type
Bath Medium: 11 gal (41.6L) white technical oil
115V 60Hz, Single Phase,13.0A
220-240V 50Hz, Single Phase, 6.8A
220-240V 60Hz, Single Phase, 6.8A
lxwxh,in.(cm): 32 3⁄4x14 1⁄4x27 (83x36x69)
Net Weight: 79 lbs (35.8kg)
- 332-002-007 Test Beaker, 400mL, for NACE TM-01-72
- 250-000-09F ASTM 9F Thermometer, Range: 20 to 230°F
- 250-000-09C ASTM 9C Thermometer, Range: –5 to +110°C
- K30130 Chuck for polishing test specimens. Includes locknut and shaft for mounting on accessory drive motor
- K30150 Drive Motor. Drives K30130 Chuck. Mounted on base. 115V 60Hz
- 380-100-001 Silicone Carbide Cloth, 100 grit. For preliminary grinding and final polishing of test specimens. Pack of 50
- K30110 Steel Test Specimens for ASTM D665/NACE TM-01-72. Machined to ASTM/NACE specifications. Without holder
- K30100 Test Specimen with Type 2 PMMA Holder for ASTM D665/NACE TM-01-72
- K30101 Test Specimen with Type 2 PTFE Holder