Kinematic Viscosity Accessories
Viscometer Holders
• For use with glass capillary viscometers
| Viscometer Type | Round Holder Catalog No. |
| Cannon®-Fenske Routine Cannon®-Fenske Opaque Cannon®-Manning Semi-Micro |
K23381 |
| Ubbelohde | K23382 |
| Cannon®-Ubbelohde Cannon®-Ubbelohde Semi-Micro (Also - Dilution and Semi-Micro Dilution types) |
K23384 |
| Cross-Arm | K23383 |
| BS/IP/RF U-Tube | K23387 |
| Cannon®-Manning Vacuum Asphalt Institute |
K23388 |
| Modified Koppers | K23363 |
High Temperature Viscometer Holders
• For use with HKV baths for temperature up to 232°C (450°F)
| Cannon®-Fenske Routine Cannon®-Fenske Opaque Cannon®-Manning Semi-Micro |
K23381-HT |
| Ubbelohde | K23382-HT |
Universal Tube Holders
Can be used interchangeably with Cannon®-Fenske, Cannon®-Manning, Cross-Arm and Ubbelohde type capillary viscometers. Choice of round (2" dia.) plastic holders or rectangular metal holders.
| K23351 | Universal Viscometer Holder, Round |
| K23350 | Universal Viscometer Holder, Rectangular |
Digital Stopwatch
• Accurate to 0.0003%
• Calibration certificate traceable to NIST
Solid-state LCD digital stopwatch with a full range of features, including single action timing, cumulative split, interval split and more. Housed in a rugged high impact case with 40" (102cm) lanyard. Supplied with 4-year battery and calibration certificate traceable to NIST.
| K23462 | Digital Stopwatch |
Bath Oil
• White mineral oil for routine applications
• Silicone fluid for high temperature applications
White Mineral Oil – Highly refined white technical oil for use in constant temperature baths. Contains an oxidation inhibitor to limit clouding at higher temperatures. Suitable for use at temperatures of up to 230°F (110°C).Silicone Fluid – Clear heat transfer fluid with high oxidation resistance and low volatility. Recommended for constant temperature bath applications above 240°F (116°C).
| Specifications | White Mineral Oil | Silicone Fluid |
| Nominal Viscosity | 14.2-17.0 cSt @ 40°C | 100 cSt @ 25°C |
| Minimum Flash Point | 248°F (120°C) | 392°F (200°C) |
| Specific Gravity @ 25°C | 0.839-0.855 | 0.964 |
| Shipped in 1 gal (3.785L) or 5 gal (18.925L) containers | ||
| 355-001-001 | White Mineral Oil | 1 Gallon Container |
| 355-001-003 | White Mineral Oil | 5 Gallon Container |
| 355-001-002 | Silicone Heat Transfer Fluid | 1 Gallon Container |
| 355-001-004 | Silicone Heat Transfer Fluid | 5 Gallon Container |
Vacuum Manifold
Designed for use with Koehler capillary-type viscometer tube baths and vacuum regulator. Manifold includes seven position valves and tubing for applying vacuum or pressure as per ASTM D2171.
| K23467 | Vacuum Manifold |
Vacuum Regulator
For ASTM D2171, “Viscosity of Asphalts by Vacuum Capillary Viscometers.” Precisely controls vacuum from 28 to 411 mm Hg below atmospheric pressure to an accuracy of ±0.5 mm Hg. Recommended for use with Cannon®-Manning, Asphalt Institute or Modified Koppers vacuum viscometers. All solid-state—contains no mercury. Amount of vacuum is shown on digital display. Ten different units of vacuum measurement may be selected through keypad on the meter.
| K23463 | Vacuum Regulator (vertical orientation) | 115V 60Hz |
| K23464 | Vacuum Regulator (vertical orientation) | 220-240V 50/60Hz |
| K23465 | Vacuum Regulator (horizontal orientation) | 115V 60Hz |
| K23466 | Vacuum Regulator (horizontal orientation) | 220-240V 50/60Hz |
Kinematic Viscosity Thermometers
| Catalog No. | Thermometer | Test Temp. (F) | Test Temp. (C) | IP Reference | |
| 250-000-74F | ASTM 74F | –65°F | — | 69F | |
| 250-000-74C | ASTM 74C | — | –53.9°C | 69C | |
| 250-000-43F | ASTM 43F | –61 to –29°F | — | 65F | |
| 250-000-43C | ASTM 43C | — | –51 to –34°C | 65C | |
| 250-000-73F | ASTM 73F | –40°F | — | 68F | |
| 250-000-73C | ASTM 73C | — | –40°C | 68C | |
| 250-000-126F | ASTM 126F | –15°F | — | 71F | |
| 250-000-126C | ASTM 126C | — | –26°C | 71C | |
| 250-000-127C | ASTM 127C | — | –20°C | 99C | |
| 250-000-72F | ASTM 72F | 0°F | — | 67F | |
| 250-000-72C | ASTM 72C | — | –17.8°C | 67C | |
| 250-000-128F | ASTM 128F | 32°F | — | 33F | |
| 250-000-128C | ASTM 128C | — | 0°C | 33C | |
| 250-000-44F | ASTM 44F | 68°F | — | 29F | |
| 250-000-44C | ASTM 44C | — | 20°C | 29C | |
| 250-000-45F | ASTM 45F | 77°F | — | 30F | |
| 250-000-45C | ASTM 45C | — | 25°C | 30C | |
| 250-000-118F | ASTM 118F | 86°F | — | — | |
| 250-000-118C | ASTM 118C | — | 30°C | — | |
| 250-000-28F | ASTM 28F | 100°F | — | 31F | |
| 250-000-28C | ASTM 28C | — | 37.8°C | 31C | |
| 250-000-120C | ASTM 120C | — | 40°C | 92C | |
| 250-000-46F | ASTM 46F | 122°F | — | 66F | |
| 250-000-46C | ASTM 46C | — | 50°C | 66C | |
| 250-000-29F | ASTM 29F | 130°F | — | — | |
| 250-000-29C | ASTM 29C | — | 54.4°C | 34C | |
| 250-000-47F | ASTM 47F | 140°F | — | 35F | |
| 250-000-47C | ASTM 47C | — | 60°C | 35C | |
| 250-000-48F | ASTM 48F | 180°F | — | 90F | |
| 250-000-48C | ASTM 48C | — | 82.2°C | 90C | |
| 250-000-129F | ASTM 129F | 200°F | — | 36F | |
| 250-000-129C | ASTM 129C | — | 93.3°C | 36C | |
| 250-000-30F | ASTM 30F | 210°F | — | 32F | |
| 250-000-121C | ASTM 121C | — | 100°C | 32C | |
| 250-000-110F | ASTM 11OF | 275°F | — | — | |
| 250-000-110C | ASTM 110C | — | 135°C | 93C |