• Thin Film Aniline Point Apparatus

Thin Film Aniline Point Apparatus



Aniline point is used to characterize pure hydrocarbons and to indicate the aromatic content of hydrocarbon mixtures. Equal volumes of aniline and sample or sample plus n-heptane are stirred together while being heated at a controlled rate. After the two phases become miscible, the mixture is cooled at a controlled rate and the temperature at which the two phases separate is the aniline point or mixed aniline point of the sample.

  •  Conforms to ASTM D611 and related specifications

For aniline point and mixed aniline point determinations according to Method B. Stirs aniline-sample mixture in a borosilicate glass thin film tube suspended in a heating bath. Thin film of mixture flows over a light well illuminated by a variable 6V lamp. Adjust heating rate per specifications using accessory Powertrol Heater. When lamp filament brightens inside well, allow mixture to cool until the two phases separate as indicated by obscuring of the lamp filament. Consists of thin film tube; 400mL borosilicate glass beaker; cover assembly with bath stirrer; sample pump rotor and cooling coil; 6V lamp with line cord; and drive motor. Positive drive pulley system rotates sample and bath stirrers. Accessory Powertrol Heater has variable stepless control and a reference dial for repeatable control of heating rate. Porcelain refractory top plate shields the 1000W heater and has a positioning well for the borosilicate glass bath. Low voltage receptacle in the heater housing accepts line cord of 6V lamp.

  • Thermometer Ferrules (2)
  • Clamps and Support Rod

Conforms to the specifications of: 

ASTM D611; IP 2; ISO 2977;

DIN 51775; FTM 791-3601; NF M 07-021

Bath Medium: 400mL of heat transfer fluid (355-001-001 mineral oil is suitable for this application)

115V 60Hz, Single Phase, 6.5A
220-240V 50/60Hz, Single Phase, 13.4A

Ixwxh,in.(cm): 14 1⁄2x18 1⁄2x20 3⁄4 (37x22x53)
Net Weight: 7 lbs (3.2kg)

Shipping Weight: 11 lbs (5.0 kg)

Dimensions: 28x8x20 in. (71.2x20.3x22.9 cm)

  • 250-000-33F ASTM 33F Thermometer, Range: –36.5 to +107.5°F 
  • 250-000-33C ASTM 33C Thermometer, Range: –38 to +42°C
  • 250-000-34F ASTM 34F Thermometer, Range: 77 to 221°F 
  • 250-000-34C ASTM 34C Thermometer, Range: 25 to 105°C
  • 250-000-35F ASTM 35F Thermometer, Range: 194 to 338°F 
  • 250-000-35C ASTM 35C Thermometer, Range: 90 to 170°C
  • K10020 Powertrol Heater, 115V 60Hz
  • K10029 Powertrol Heater, 220-240V 50/60Hz