Copper Strip Corrosion - Pressure Vessel Bath



The Copper Strip Tarnish Test assesses the relative degree of corrosivity of petroleum products, including aviation fuels, automotive gasoline, natural gasoline, solvents, kerosene, diesel fuel, distillate fuel oil, lubricating oil and other products. A polished copper strip is immersed in 30mL of sample at elevated temperature. After the test period, the strip is examined for evidence of corrosion and a classification number from 1-4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standards. For aviation fuels and natural gasoline, the sample tube is placed inside a stainless steel pressure vessel during testing.

  • 4 and 8 position bomb bath models available
  • 20 position test tube bath model available
  • Conforms to ASTM D130, IP 154, and related specifications
Test Bomb Baths

Temperature-controlled water bath immerses Copper Strip Corrosion Test Bombs at the required depth per ASTM specifications. Use for testing aviation gasoline, aviation turbine fuel and natural gasoline. Fully insulated, double-wall stainless steel construction. Choice of four-bomb and eight-bomb models. Optional removable test tube rack converts four-bomb model for testing of products not requiring corrosion bomb.

Test Tube Baths

Constant temperature bath immerses 20 test tubes for copper strip tarnish tests of products not requiring a test bomb, including: diesel fuel, fuel oil, automotive gasoline, Stoddard solvent, kerosene and lubricating oil. Operator and equipment are protected by an overtemperature control circuit which automatically interrupts power to the unit should bath temperature exceed a programmed cut-off point. Welded stainless steel inner wall and powder coated steel outer wall construction with built-in support rack. Fully insulated.

Conforms to the Specifications of:

ASTM D130, D4048; IP 154 FSPT DT-28-65; ISO 2160; DIN 51759; FTM 791-5309, FTM 791-5325; NF M 07-015

Capacity:

  • K64310/K64319: 4 Copper Strip Corrosion Test Bombs
  • K64320/K64329: 8 Copper Strip Corrosion Test Bombs
  • K64330/K64339: 20 Copper Strip Corrosion Test Tubes

Temperature:

  • Range: Ambient to 221°F (105°C)
  • Control Stability: ±0.09°F (±0.05°C)

Bath Medium:

  • K64310/K64319: 6.1 gal (23.1 L) water
  • K64320/K64329: 7.2 gal (27.2 L) water
  • K64330/K64339: 7.2 gal (27.2 L) water

K64310/K64320/K64330: 115V 60Hz, Single Phase, 10A

K64319/K64329/K64339: 220-240V 50/60Hz, Single Phase, 5A

  • K64330-6B-8T Optional Rack for 6-Bomb 8-Tube Conversion (K64330/K64339 Models)
  • K25200 Copper Strip Corrosion Test pressure vessel
  • K25080 Copper Test Strip. 12.5x1.5-3.0mm x 75mm to ASTM specifications
  • 332-004-004 Test Tube. 25 x 150mm
  • 332-004-002 Viewing Test Tube
      Protects copper strip during inspection or storage
  • K25100 ASTM Copper Strip Corrosion Standards
      Colored reproductions of tarnished strips encased in a plastic plaque
  • 380-220-001 Silicone Carbide Paper, FEPA Grade, 220 grit
      For polishing of copper strips prior to testing - Pack of 50 sheets
  • 380-150-003 Silicone Carbide Grain, FEPA grade, 150 grit
      For final polishing of copper strips prior to testing - 1 lb package
  • K25000 Polishing Vise
      Holds copper strip firmly in place without marring the edges. Stainless steel, mounted on a composition base
  • K25090 Multi-Strip Polishing Vise
      Similar to K25000 but capable of holding four strips at a time
  • 250-000-12F ASTM 12F Thermometer - Range: –5 to +215°F
  • 250-000-12C ASTM 12C Thermometer - Range: –20 to +102°C
Test Apparatus for Aviation Fuels and Natural Gasoline
  • (1) K64310 or K64319 4 Position Copper Strip Corrosion Test Bomb Bath
  • (4) K25200 Copper Strip Corrosion Test pressure vessel
  • (4) K25080 Copper Test Strip. 12.5x1.5-3.0mm x 75mm to ASTM specifications
  • (4) 332-004-004 Test Tube. 25 x 150mm
  • (4) 332-004-002 Viewing Test Tube
      Protects copper strip during inspection or storage
  • (1) K25100 ASTM Copper Strip Corrosion Standards
      Colored reproductions of tarnished strips encased in a plastic plaque
  • (1) 380-220-001 Silicone Carbide Paper, FEPA Grade, 220 grit
      For polishing of copper strips prior to testing - Pack of 50 sheets
  • (1) 380-150-003 Silicone Carbide Grain, FEPA grade, 150 grit
      For final polishing of copper strips prior to testing - 1 lb package
  • (1) K25000 Polishing Vise
      Holds copper strip firmly in place without marring the edges. Stainless steel, mounted on a composition base
  • (1) 250-000-12F ASTM 12F Thermometer - Range: –5 to +215°F
     or 250-000-12C ASTM 12C Thermometer - Range: –20 to +102°C
Test Apparatus for Diesel Fuel, Fuel Oil, Automotive Gasoline, Stoddard Solvent, Kerosene, Lubricating Oil, and Biodiesel
  • (1) K64330 or K64339 20 Position Copper Strip Corrosion Test Tube Bath
  • (20) K25080 Copper Test Strip. 12.5x1.5-3.0mm x 75mm to ASTM specifications
  • (20) 332-004-004 Test Tube. 25 x 150mm
  • (20) 332-004-002 Viewing Test Tube
      Protects copper strip during inspection or storage
  • (1) K25100 ASTM Copper Strip Corrosion Standards
      Colored reproductions of tarnished strips encased in a plastic plaque
  • (1) 380-220-001 Silicone Carbide Paper, FEPA Grade, 220 grit
      For polishing of copper strips prior to testing - Pack of 50 sheets
  • (1) 380-150-003 Silicone Carbide Grain, FEPA grade, 150 grit
      For final polishing of copper strips prior to testing - 1 lb package
  • (1) K25090 Multi-Strip Polishing Vise
      Similar to K25000 but capable of holding four strips at a time
  • (1) 250-000-12F ASTM 12F Thermometer - Range: –5 to +215°F
     or 250-000-12C ASTM 12C Thermometer - Range: –20 to +102°C

Below are links to tutorial videos for this product