• Digital Humidity Cabinet

Digital Humidity Cabinet



Tests the ability of metal preservatives to prevent steel panels from rusting under conditions of high humidity. Polished steel panels are immersed in the sample oil and then suspended in the humidity cabinet for a specified test period.

  • Conforms to ASTM D1748 and FTM 791-5310 specifications

Produces a moisture saturated atmosphere with continuous condensation at a constant 120°F (48.9°C) for 33 steel test specimens. Test panels are suspended on a 1⁄3rpm rotating stage. Air flow and water level control systems maintain required conditions inside the cabinet per Mil. Spec. and ASTM specifications. Air temperature is maintained at 120 ±2°F (48.9 ±1.1°C) by a digital LCD electronic controller. A continuous heater circuit assists the control heater in bringing the cabinet up to temperature prior to testing. Over-temperature protection is provided by an adjustable digital thermostat which cuts off power to the cabinet in case of overheating. Cabinet interior is stainless steel lined and all interior components are of stainless steel or chrome-plated steel construction. The hinged cover consists of two layers of desized cotton cloth mounted on a metal frame. Oil and condensate dripping from the specimens are collected in a drip pan and piped to an external drain.

  • Monel Test Specimen Hooks (33 sets)

Conforms to the specifications of: ASTM D1748; FTM 791-5310

Capacity: 33 rust test specimens

Water Level Control: 8 in. (203mm)

Temperature Control Stability: ±2°F (± 1.1°C) (air temperature)

Heater Range: 0-1500W

Air Metering: 0.878±0.02832m3/h at standard temperature and pressure (31±1 ft3/h)

Air Distribution: 20-diffuser manifold

Rotating Stage: 1⁄3rpm

115V 60Hz, Single Phase, 13.0A
220-240V 50Hz or 60Hz, Single Phase, 6.8A

32x28x41½ (81x71x105)

Net Weight: 206 lbs (93.4kg)

Shipping Weight: 344 lbs (156.1 kg)

Dimensions: 42x37x50 in. (106.7x94.0x127 cm)

  • K35210 Steel Test Panels 
  • Soft temper low carbon cold rolled steel, surface ground on both faces to a 10-20 micro-inch finish. 2x4x1⁄8"(51x102x3.2mm)
  • 380-240-002 Aluminum Oxide Cloth, 240-grit - For test panel preparation. Pack of 50
  • 250-000-09F ASTM 9F Thermometer - Range: 20 to 230°F 
  • 250-000-09C ASTM 9C Thermometer - Range: –5 to +110°C