• Conforms to ASTM D2440 and related specifications
• Capacity for 6 samples
• Digital temperature control with digital display and over-temperature cut-off

Constant temperature oil bath for testing oxidation stability of mineral insulating oils. Immerses six oil receptacles at the required depth per ASTM specifications at 110°C ± 0.5°C, and controls oxygen flow to each sample at the rate of 1L/h ± 0.1L/h through six independent flowmeters mounted on a common manifold. Insulated double-wall stainless steel bath has microprocessor temperature control with °C/°F switchable digital setpoint and display. Operator and equipment are protected by an overtemperature control circuit which automatically interrupts power to the unit when bath temperature exceeds a programmed cut-off point. Order bath thermometer drying tower and catalyst separately.

Conforms to the Specifications of:

ASTM D2440

Capacity:

• 6 Samples

Temperature:

• Range: Ambient to 230°F (110°C)
• Control Stability: Exceeds ASTM Requirements 

Bath Medium:

• 7.2 gal (27.2 L) white technical oil

K64100: 115V 60Hz, Single Phase, 10A

K64190: 220-240V 50/60Hz, Single Phase, 5A

• K12130 Copper Catalyst Coils - Sealed in a glass jar with a nitrogen atmosphere. Pack of 24 (12 sets)
• 332-005-010 Drying Tower 250mL with ground glass stopper and side tubes
• 332-005-011 Glass Filter Crucible
• 250-000-95C ASTM 95C Thermometer - Range: 100 to 130°C
• 355-001-001 White Technical Oil - 1 gal container
• 355-001-003 White Technical Oil - 5 gal container